CHAMALEON
CHAMALEON High Temp Metal Putty 514 High Temperature Stucco 514
Format
CHAMALEON High Temp Metal Putty 514
1.4 kg
Carismatix Srl
Via dei Laghi 24
36077 Altavilla vicentina VI
Italy
Same-day shipping if you order by 4:00 PM
Free shipping on orders over €29.90
100% secure payment
48-hour delivery
- Excellent resistance to high temperatures without loss of adhesion: - approximately 30 minutes at 220 ºC.
- It can be applied directly to iron, steel and aluminum.
- It can also be used to fill welds.
- Dark grey colour.
Download the Technical Sheet
Download the Safety Data Sheet
Racconta la tua esperienza e aiutaci a migliorare sempre di più!
How to use it BEST
///
USAGE INSTRUCTIONS
1. The substrate must be clean, dry and free of grease. Lightly sand the surfaces. Remove 2 old uncured paints and primers.
2. Mix the body filler with the hardener thoroughly. Do not use more than 3% hardener.
3. Clean and degrease the entire surface to be painted before each operation.
4. Strip the defective areas down to bare metal and dry sand with P 80/150 sandpaper. After drying, use P 150/240 sandpaper for dry sanding.
5. Before applying the filler, sand the entire surface with P 240 / 360 dry sandpaper until a matt finish is achieved.
6. When filling non-ferrous metals (e.g. aluminium, galvanised surfaces) a primer coat can be applied to ensure optimum adhesion before applying the body filler.
7. Do not overpaint without isolating the surface with a 1K or 2K filler.
8. Drying:
• 20 minutes at 20°
• 10 minutes at 60°
