CHAMALEON
Chamaleon Headlight Blackout Kit Il Preparatore 2.0
Advanced solution for darkening the headlights, ensuring a stylish look and long-lasting protection
Chamaleon Headlight Blackout Kit Il Preparatore 2.0
Carismatix Srl
Via dei Laghi 24
36077 Altavilla vicentina VI
Italy
Same-day shipping if you order by 15:00 PM
Free shipping on orders over 39€
100% secure payment
48-hour delivery
The perfect kit recommended by Il Preparatore 2.0 to darken the headlights of your vehicle.
With this kit you can make two pairs of headlights.
The Kit includes:
- Paint for Headlights, Lamps and Plastic Glass - Aerosol Paint for Glass and Plastic Transparent
- Premium 2K Ready-to-Use Headlight Clear Coat
- Antisilicone - Silicone Remover
- Paper Tape - Premium Masking Tape
- Electrostatic Tape Film - Premium Masking Drop Film
- Sanding Sponges (2x brown FINE, 2x green SUPER FINE) - Double Sided Sanding Sponges
How to use it BEST
HOW TO USE CHAMALEON HEADLIGHT BLACKOUT KIT IL PREPARATORE 2.0
1. Mask the surface around the headlight to be darkened with Q1 yellow tape.
2. Sand the headlight surface with the abrasive pad. Choose which pad to use according to your needs (green if slightly damaged, brown if heavily damaged).
3. Remove excess dust.
4. If the brown pad (coarser grit) was used, do a second pass with the green pad (fine grit).
5. Cover the surface around the headlight with Q1 Drop Film and cut out only the film that covers the headlight surface.
6. Degrease the surface with Chamaleon Silicone Remover
7. Spray several thin coats of Paint for Glass and Plastic Transparent at 3 - 5 minute intervals until the desired effect is achieved and allow to dry for 1 hour.
8. Catalyze Headlight Clear Coat through the ring located on the bottom of the can.
9. Insert the ring into the appropriate insert, pull and rotate the can 360°.
10. Shake well before use. Spray a light and even coat.
11. Apply two even coats with a 5-minute interval between each coat.
12. Allow to dry for approximately 7 hours. Remove the Drop Film and tape.