CARISMATIX
CARISMATIX PRO Polishing Kit for Coachwork
Dimensions
CARISMATIX PRO Polishing Kit
Ø3"/75mm
Carismatix Srl
Via dei Laghi 24
36077 Altavilla vicentina VI
Italy
Same-day shipping if you order by 12:00 PM
Free shipping on orders over 39€
100% secure payment
48-hour delivery
The Pro Polishing Kit is designed for those who want to tackle the polishing phase using professional products selected to cover all fundamental stages: cutting, finishing, gloss, and final surface preparation.
A balanced kit that allows you to work safely on different defect levels, achieving a visually deeper, more uniform, and brighter paint finish.
Heavy Cut H9.02 is a new generation polish, designed for the rapid restoration of severely weathered paints and for the removal of deep scratches, paint overspray, and sanding marks up to P1200 grit.
Final Cut 9000 is a high-performance abrasive that is perfect for removing minor scratches, swirls, holograms, and other polishing marks.
Essence gives the paint an extraordinary finish thanks to semi-permanent fillers that cover small defects and provides SiO2-based protection.
ZERO (pH 7) is a non-aggressive Wipe Out cleaner, designed for perfect paint preparation before applying coatings, waxes, or sealants. It effectively removes oils, polish residues, silicones, and other contaminants, leaving the surface perfectly clean, degreased, and ready for protection.
The Kit includes:
- Compound Paste - Heavy Cut H9.02
- Foam Pad for Heavy Defects - Heavy Cut Foam Pad
- Medium Finishing Polish - Final Cut 9000
- Foam Pad for Medium Defects - Unipad Yellow
- Quartz Finishing Polish and Primer - Essence
- Ultrasoft Finishing Pad - Gloss Pad
- Defect Inspection Degreaser - ZERO
- 420 g/m² Microfiber Cloth - Dual Pile
- 320 g/m² Microfiber Cloth - Wipe Out
How to use it BEST
HOW TO USE CARISMATIX PRO POLISHING KIT
1. Apply Heavy Cut H9.02 to the surface with a Heavy Cut Foam Pad.
2. Work at a medium speed and moderate pressure, using crosswise movements.
3. Remove residues with the Dual Pile cloth.
4. Spray a small amount of ZERO onto the Wipe Out cloth and spread it over the surface to check for defects.
5. Apply 4 pea-sized drops of Final Cut 9000 to the Yellow Unipad.
6. Work at a medium speed and moderate pressure, using crosswise movements.
7. Remove residues with the Dual Pile cloth.
8. Spray a small amount of ZERO onto the Wipe Out cloth and spread it over the surface to check for defects.
9. Apply Essence to the Gloss Pad and spread the product over the surface.
10. Remove residues with the Dual Pile cloth.
