CHAMALEON
CHAMALEON 2K Wet on Wet Primer 5:1 467 Wet on Wet 2K 5:1 467
Format
CHAMALEON 2K Wet on Wet Primer 5:1 467
1 L
Carismatix Srl
Via dei Laghi 24
36077 Altavilla vicentina VI
Italy
Same-day shipping if you order by 4:00 PM
Free shipping on orders over €29.90
100% secure payment
48-hour delivery
- It can be painted after just 15 minutes of drying at 20 ºC.
- Provides universal adhesion.
- Directly applicable on steel, iron, aluminium, galvanised substrates and also on plastics commonly used in the automotive industry (e.g. PP-EPDM, ABS, PC, ABS-PC, PUR, PVC, GRP).
- Light grey colour.
|
To be used with |
Format | Code |
|---|---|---|
|
Hardener for 488 Acrylic Primer |
0.2L | CH/12884 |
*Primer purchased separately.
See the table of Mixing Ratios for Primers
Download the Technical Sheet
Download the Safety Data Sheet
Racconta la tua esperienza e aiutaci a migliorare sempre di più!
How to use it BEST
///
USAGE INSTRUCTIONS
1. The surface must be clean, dry and free of grease (check the substrate preparation of the various surfaces on the technical data sheet).
2. Mix the product with the catalyst at a ratio of 5:1 by volume.
3. Dispense the product with a spray gun or with HVLP with a 1.3-1.5mm nozzle and a pressure of 1.6-2.0 bar.
4. Apply only one even, smooth coat to ensure the best possible flow. If there are highly absorbent areas on the surface to be painted (e.g. body filler points), prime these areas by applying only one spray coat. After a short flash-off time of approximately 2-3 minutes at 20°C, apply the final coat over the entire surface.
