CARPRO
CARPRO Car Wash and Decontamination Kit For Car Exterior Washing and Decontamination
Ideal for removing ferrous contamination, tar and other residues
CARPRO Car Wash and Decontamination Kit
Carismatix Srl
Via dei Laghi 24
36077 Altavilla vicentina VI
Italy
The Kit with essential CARPRO products for washing and decontaminating your car's exterior surfaces.
The Kit includes:
- CARPRO Lift 1L - Pre-wash Foam
- CARPRO IronX 500ml - Iron Remover
- CARPRO Reset 500ml - Neutral Foaming Shampoo
- CARPRO Descale 500ml - Water Spot Remover Shampoo
- CARPRO Retyre 500ml - Tire & Rubber Cleaner
Prodotto
- Linea
How to use it BEST
HOW TO USE CARPRO CAR WASH AND DECONTAMINATION KIT
1. Ensure the surface is cool and not exposed to the sun.
2. Dilute Lift with water at a ratio ranging from 1:10 (with Foam) to 1:50 (with Spray).
3. Mist from bottom to top.
4. Allow the product to dwell on the surface for a few minutes before rinsing. Do not allow the product to dry, even if diluted.
5. Rinse and wash the car with CARPRO Reset diluted 1:500.
6. Thoroughly wash the car using a wash mitt and rinse.
7. Dilute Descale according to the extent of limescale contamination, from 1:50 to 1:100 for bucket washing or 1:5 to 1:10 for foam lance.
8. For light contamination: use Descale with a foam lance and wait a few minutes before rinsing. Then proceed with a hand wash.
9. For heavier contamination: wash panel by panel. Wash the panel and allow the product to dwell for as long as possible without letting it dry. Repeat if necessary.
10. Rinse with water.
WHEELS AND TIRES
1. Wash the surface and shake IronX before use.
2. Spray the product on the affected surface and wait 3-5 minutes. Contaminants will turn purple-red.
3. If necessary, use a brush, scrub brush, or a damp sponge.
4. Rinse with water.
5. Rinse tires with water to remove surface dirt.
6. Spray ReTyre onto the rubber and leave for 30 seconds.
7. Spray Retyre onto a medium-stiff brush and scrub thoroughly on the tire.
8. Rinse the treated surface.
9. Repeat the treatment until the foam generated on the rubber turns white.
N.B. Do not let the product dry on wheels or any other surface. Do not use on delicate surfaces or finishes. If ReTyre drips onto wheel surfaces, rinse the area with water.
