CARPRO
CARPRO Basic Polishing Kit
Shinemate Polisher for KIT (Model)
CARPRO Basic Polishing Kit
SHINEMATE ERO600 G2 - Ø5"/125mm
Carismatix Srl
Via dei Laghi 24
36077 Altavilla vicentina VI
Italy
A convenient, functional and complete kit that includes the CARPRO polishing system, microfibre cloths, pads and the polisher.
The Kit includes:
- 1 ShineMate Polisher of your choice
ERO600 G2 Ø5"/125mm
EX605 Ø5"/125mm
EX610 Ø5"/125mm
EX620 Ø5"/125mm - 1 Compound Abrasive Paste - Ultracut
- 1 Medium Nanotechnological Polish - Fixer
- 1 IPA Defect Verification and Pre-Application of Sealants - Eraser
- 1 Microfiber Cloth - Allround 365
- 1 Medium Pad - Orange Pad Ø5"/125mm
- 1 Flash Pad Ø5"/125mm
How to use it BEST
HOW TO USE CARPRO BASIC POLISHING KIT
1. Add 3–4 pea-sized drops of Ultracut onto the Flash Pad.
2. Spread the product over a 40x40 cm section at the lowest speed.
3. Increase the speed (4–5), applying minimal pressure for the first 2 cross passes and increasing it with each pass.
4. Work until the defects are completely removed and wipe away any excess compound with a clean microfiber cloth.
1. Apply 4–5 drops of Fixer onto the Orange polishing pad.
2. Spread the product at low speed over a 50x50 cm section and increase the speed to about 1000–1200 RPM with medium pressure.
3. Work the surface until the defects are completely removed and wipe away the residue with a clean microfiber cloth.
N.B. It is recommended to frequently blow the pad with compressed air and keep it as clean as possible.
1. Spray Eraser onto one panel at a time, leave it to act for 20–30 seconds and remove with a clean, soft microfiber cloth.
